智能火灾感知系统结构图
智能火灾感知系统产品群
-
电弧传感器
1. Sensing fore-end and upper/lower section based on the whole area of arc. Sensor
2. Sensing tiny arc. which is below 5A and high current arc. which is over 5A
3. Shutting off error caused by saturation current with CT not available ( It is possible to sense high current arc. with no error)
4. Possible to sense harmful/harmless arc.
5. Sending data through wire/wireless in real time. -
CO传感器
1. Sensing CO concentration in real time
2. Alarm is on for harmful things to human body
3. Forecast-> warning->emergency step-by-step alarm
4. CO perpection sensor is more suitable than photoelectric light smoke detector since it is more adaptable to initial fire because it forms with incomplete combustion first and progresses to perfect combustion.
5. Sending data through wire/wireless in real time.
6. Exceptional detection of smokeless combustion -
混合动力热成像相机
1. It is possible to control visual video and thermal burn video at the same time
2. Unlike preexisting fire sensor way, this sense the temperature and hot spot by tracking and analyzing the change of temperature before the fire occurs.
3. It is possible to discover the high temperature before the fire based on the thermal burn video which visualized the heat.
4. Intelligent image analysis, fire detection such as cigarette, lighter, flame
5. Immediately notified when fire is detected -
远程电源控制器
1. The output power ON/OFF
2. Monitoring the consumption of the current power output
3. Alarm when the overcurrent is applying
4. Condition monitoring and ON/OFF switch for output channel
5. It automatically SHUT-DOWN when it exceeds the rating current
6. Automatically restores after shutting off the output power (Available to set up the restore time)
7. Sending data in real time